8,732
edits
Changes
→To Save a Picture:
: 1. Connect a cassette recorder to your computer following the directions on pages 15-16 of the User's Reference Guide. Connect your cassette recorder to the plug end labelled 1 for CSl.
: 2. When you have a design on the screen that you want to SAVE, press the '''TAPE''' key.
: 3. When you press the '''TAPE ''' key, the computer stores your design temporarily and shows you the following screen:
: 4. Press '''s ''' for SAVE.
: 5. Instructions for recording begin to scroll upward on the screen. Follow these instructions (see page 16-18 of the User's Reference Guide for a complete explanation of the instruction screens).
: 6. After your design has been saved on the cassette tape, you again see your design on the screen.
Your design is now on tape. You can continue working in any activity of VIDEO-GRAPHS as usual.
====To Load a Picture:====
To LOAD a picture back into the VIDEO-GRAPHS module, follow these directions:
: 1. Insert the VIDEO-GRAPHS module into the computer (if it is not already in place).
: 2. Connect a cassette recorder to your computer as described on pages 15-16 of the User's Reference Guide.
: 3. Put the tape on which you saved the picture earlier into the cassette recorder.
: 4. Indicate you want to LOAD a picture by
::■ Pressing the '''3''' key when looking at the main selection list ('''3''' "TO LOAD A PICTURE YOU HAVE SAVED")
OR
::■ Pressing the TAPE key.
: 5. When you press '''3''' (from the main selection list) or press the '''TAPE''' key, you see this screen:
[[File:Video-Graphs Save-Load screen.png|center|500px]]
: 6. Press '''L''' to LOAD.
: 7. Instructions for loading begin to scroll upward on the screen. Follow these instructions (see page 18 of the ''User's Reference Guide'' for a complete explanation of the instruction screens).
<div id="mp-tfp" style="margin:0.1em 0.4em 0.6em;"></div>
